First Board Populated

So what have we accomplished today... As you can see the board has been fully populated, no real problems or overlooks were found while putting the board together.

One thing that was not ordered was the 73.2K ohm resistors for the current sensing, so for this version of the board we have 100K ohm resistors.

Some changes that will have to come from REV A are

• The spacing between the battery input and ESC1 are way to close together.
• The spacing between R44 and R45 are also to close.
• Better silkscreen to determine which way Capacitors and LEDs are supposed to face.

Here are some more photos of the finished board.